Showing posts with label craft. Show all posts
Showing posts with label craft. Show all posts

Friday, July 24, 2009

Tea Stained Paper

Tea stained paper has a lot of uses. I am putting some into regular glass frames to use as white boards. This will prevent the boards from having that drab "office" feeling.

To make it, start with a white or antique white paper. You don't have to use linen paper or anything of that sort. Regular copy paper will work and is sturdy enough to withstand the process.

Heat some water and soak your tea bags in it for a minute or so. Use either less water or more bags than you normally would for tea--you want it concentrated. Different colored teas will give a different look to the finished paper so experiment away. When ready to stain your paper, squeeze the bags over the steeping water just enough to prevent them from being drippy. Dab the tea bags randomly over the paper's surface until the page is wet and mottled. You may want to use paper towels to dab pools of tea that collect on the surface.

If you are going for an uneven edge, as in the picture, the best time to tear it is while the paper is still somewhat damp. Turn the paper over and carefully tear the edge. Putting a ruler down to define your rough edge will help you to gauge your tearing work. After it has been torn, dab the torn edge with the tea bag and it will soak it right in, giving a darker color to the edge.

To make dark stained creases, you need to crumple the paper. Once the paper is dray (or at least somewhat dry), crinkle it up and smooth it out. You can do this a few times for more creases. Once you are satisfied with the creases, drag your the prepared tea bags along the surface of the paper until you've dampened the whole thing again. The dark tea will sink into the creases giving a truly aged look. Allow to dry.

For a smoother finished product, you can iron the paper between layers of scrap cloth. Steam may aid this process but protect the ironing surface as some tea may stain it.

Thursday, June 25, 2009

Alien Mutant Plants of Doom

For you elementary school teachers, homeschooling parents, or crafters with unusual tastes I'd like to direct you to my math education blog: Family Math where I have posted instructions on building alien foliage for a math puzzle called Evil Mutant Plants of Doom.

Family Math is where I get to discuss math education and encourage a dialog about mathematics problem solving between adults and children. I developed a number of math puzzles and games intended for Family Math fairs. It is a fantastic way to combine my math fandom and my crafting skills.

Saturday, June 20, 2009

Tutorial: Modular Paper Cone

Paper cones are versatile for crafting.
- tip down, they serve as hanging vases
- holiday paper cones can represent trees
- they make great party hats

It's simple to roll paper into a cone. But what if you want to make a cone that's a specific radius and height? What if you want the base to sit evenly on a flat surface?

Making custom cones is simple and only uses a little math. To make it more accessible (that is, to prevent your eyes from glazing over), I will simply give the instructions here. I plan to post an explanation of the calculations on my Family Math blog.


Step One: Determine the radius (r) of your base and the height. You'll use these to find the "slant height". This online calculator will do it for you: Calculator. Just enter the radius of the base and the height as the sides. The result (hypotenuse) is your slant height: s. (If you know a little geometry, this slant height is calculated using the Pythagorean Theorem.)



Step Two: Determine the angle of the wedge shape you'll need to cut from paper. This another simple calculation: Angle=360r/s
(r is the radius of the base, s is the slant height from the previous step)



Step Three: You will be drawing this angle on your paper. To do this, select a point for the vertex of the angle. Draw one line that starts at the point and is length s.


Using a protractor, mark a point that makes the angle you determined from this point. Draw a line that connects the point to this line and extends beyond it for length S. At this point, you should have an angle with two legs of equal length on your paper.



Step Four: To draw the arc which will be the edge of your cone's base, you will need a compass*. Adjust your compass so the distance it spans is the same as the slant height, s. Place the point of your compass on the vertex of your angle and sketch the arc.



Step Five: Make a tab along one side of the wedge, as shown. This will be the gluing tab. I added the red lines to this picture to show the details. Notice, I cut the tab short on the point side.




Step Six: Cut out the wedge, roll into a cone and glue together.





*(You can also substitute a strip of paper a little longer than S for the compass. Place the paper to be cut onto cork board or some other surface you can pin into. Mark a line on the strip that is the same length as S. Make a small hole in one end of the line. Then pin the other end of the line through the vertex of your angle. Place a pencil into the hole and make your arc line.)

Tuesday, June 16, 2009

Pirate Pushpins

These are sword, dagger, and knife pushpins I made for my bulletin board. I created them because of my husband's love of "pirate culture." I was also inspired by the image of the dagger in the door when Captain Hook kindnapped Peter's kids in the movie "Hook."


They are even sturdy enough to be put into a wall and hold a small amount of weight--like a parchment ransom demand or declarations of pirate rights. This one is in my husband's office at work where it holds a little sign in full pirate style.

Tuesday, May 26, 2009

Math and Crafts

I found this lovely post on Math and Crafts . I am always looking for patterns in things. Maybe it's the closet synesthetic in me, but it really gives me a thrill to see math used as an expressive form--which it kind of always has been to me.

Friday, May 22, 2009

Give Away!

This year I will be participating in the Sew, Mama, Sew! Blog May Giveaway Day on May 27th. If you are a crafter with a blog or online shop, consider participating. It's a great way for other people to see what you've got and, by visiting the participants (there will be MANY), you will discover a lot of great craft websites.

Thursday, May 7, 2009

Making Your Own Custom Cording

I posted a new Instructable today, showing how to make custom cording for craft, costuming, and home decorating projects. It's made from embroidery thread which is cheap, readily available, and comes in an absolute sea of colors. The nice thing about making it yourself it that it can be the precise color, thickness, and length you need!

Monday, February 16, 2009

The One Ring

Tonight I made a sphere stand that looks like the One Ring from Tolkien's Lord of the Rings series. It was actually pretty simple. I used an image transfer technique to put the inscription onto my clay which I then formed into the ring shape. There are quite a few descriptions of this method online so I won't go into details here except to say that it required a photocopy (toner-based image). Sadly, I had to visit Kinkos twice because I forgot to reverse the inscription on my first copy.

Thursday, February 5, 2009

Blues and Greens

Here are some more of my faux gems, yet to be set into clay. I am experimenting with blues and greens. The photo doesn't show it as well as I'd hoped but there is a bit of variation in the textures and colors in the stones. The green ones show this best. I've been using metallic permanent markers to change the reflectivity and opacity of the colors.

Sunday, February 1, 2009

Scroll

This is a scroll my daughter and I made for her French class. The assignment required that she write a poem in French and include some kind of artwork in the finished presentation of it. Apparently, anything will do, even clipart. So we made the scroll. It's made from wood dowel pieces, polymer clay, and some little faux gems.

The "paper" is tea-dyed yellow fabric that was run through the printer using a multi-step process that I call "The Happy Accident." I love it when a not-so-well thought out plan goes terribly right!

This can be hung with cafe rod brackets. I think I will try my hand at longer and more detailed scrolls.

Monday, January 12, 2009

Coming Soon: Fantasy Bling



I'm working on a tutorial on making faux polished gemstones for fantasy home decor and costuming. I figured out how to make these little guys when I was making costumes for a Harry Potter book release and wanted some really unique jeweled embellishments. Best of all, these can be custom colored for your project. I think they have a very medieval flair.